| NYLON POLYAMIDE-6 1013B |
PA-6 UF, standard viscosity |
Injection |
|
| NYLON POLYAMIDE-6 1013NW8 |
PA-6 UF, standard viscosity, fast cycle |
Injection |
|
| NYLON POLYAMIDE-6 1015GC3 |
PA-6 15% GF |
Injection |
|
| NYLON POLYAMIDE-6 1022B10 |
PA-6, medium RV grade (3.2 - 3.4) |
Extrusion/Blow |
|
| NYLON POLYAMIDE-6 1026B4 |
PA-6, high RV grade (3.6) |
Extrusion/Blow |
|
| NYLON POLYAMIDE-6 1022MT5 |
Excellent softness, Well balance between line and knot strength, Good transparency, Higher drawing ratio, Fishing Net, Fishing Line |
Injection |
|
| NYLON POLYAMIDE-6 5022MT1 |
Excellent softness, Well balance between line and knot strength, Good transparency, Higher drawing ratio, Fishing Net, Fishing Line |
Injection |
|
| NYLON POLYAMIDE-6 5034B |
The grade is suitable in outer, middle and/or inner layer for a wide range of film extrusion applications |
Injection |
|
| UBE NYLON 1013B OG |
Excellent mechanical properties, Good processability |
Injection |
|
| UBE NYLON 1013NW8 OG |
High Quality, Unreinforced, Superior Oxygen Gas Barrier, Self-Lubricating, Standard Viscosity Polyamide 6 (PA 6, Nylon 6) Grade. Exhibits Good Toughness, Smaller Friction Coefficient, Good Compatibility With Fillers And Stiffeners |
Injection |
|
| UBE NYLON 1015B |
Excellent mechanical properties, Good processability |
Injection |
|
| UBE NYLON 1026B4 |
PA-6, high RV grade (3.6) |
Extrusion |
|
| UBE NYLON 1030B4 |
PA6 (Nylon 6) – 30% Glass Fiber Reinforced, High mechanical strength, Good heat resistance |
Injection |
|
| UBE NYLON 5034MTX1 |
Superior transparency and softness |
Injection |
|
| UBE NYLON 1018SE |
Non-halogenated and non-phosphide flame retardant |
Injection |
|
